Which buckmark model

Offered in three separate models:. View Model Details. Version has blued finish, contoured walnut grips, target sights. Weight Features new target-style Cocabolo grips, full length scope mount.

Hooded target sights. Weight 35 oz. Same as above. Has gold anodized frame and top rib. Slide blue. Walnut grips. Same action and barrel as Target Model, with hoodless adjustable field sights. Slide and barrel blued; rib and frame anodized blue. Grips are walnut. Features new target-style grips and full-length scope rail.

Weight about 35 oz. Grips laminated rosewood. Barrel polished blue. Weight about 24 oz. Designed for metallic silhouette competition. Fluted barrel 7. Adjustable trigger pull and rear sight, removable barrel are some of the features. Weight about 36 oz. Choice of laminated wood or rubber grips. Fitted with 14" barrel and top rib. Front sight hood slightly rearward of muzzle for maximum sight radius of 15".

All other features same as Silhouette model. Weight 64 oz. Features lightweight 5. Smaller grip diameter. There are also some small parts that are easily lost when disassembling a Buckmark, most notably the tiny c-clip that goes on the recoil spring guide rod, sight base screws, sight base screw washers, extractor plunger, and extractor plunger spring. One piece that people sometimes mangle when disassembling is the barrel screw. Looking at what parts are sold out on Numrich backs all this up That buffer is the only part I've actually had fail for me.

Note that there are 2 different types of firing pins pre and present. There are 3 different types of buffers: very old black buffers no longer made, and you don't want one; they do not last , pre white plastic buffers that have the raised round "lego" shape on the back, and only fit pre Buckmarks no longer made and hard to find , and present white plastic buffers that are flat on the back, and fit all Buckmarks of all ages get these.

There's a guy with user name Rusty22 that is also active on the Buckmark forums on RimfireCentral. He makes the Buckmark Maintenance Tool. That sight includes photos, and a nice video showing how to use the tool to disassemble a Buckmark.

I ordered mine in October by sending him an email. URX vs. But note that there are as of only 3 different grip frames the metal part of the gun, under the grip panels. The grip style is often part of the model name, but not always. The problem is, the grip style is an important factor when choosing which Buckmark model to get, and Browning doesn't explain the differences on their website.

It is important to make this decision before you buy your Buckmark, because you can change your grip panels, but you can't change your grip frame. If you want more details and pictures, check out this grip frame thread on Rimfire Central. But here's the short version:. The standard grip and UFX grip have the same frame dimensions. Most aftermarket Buckmark grips fit this grip frame only, because for a long time, it was the only Buckmark grip frame.

The standard grip panels are the shaped wooden grips with separate left and right panels, that you usually see on the Hunter and Field models.

The UFX grip panels have colored rubber inserts set into the grips. So they have different grip panels attached to them, but they share the same grip frame. As a result, grip panels are interchangeable between standard and UFX models.

Because this frame is the largest, people with large hands typically prefer it. The URX grip frame has smaller frame dimensions, and is often covered with grips that wrap around the front and have finger grooves although, when you take the grips off, the front of the metal frame is mostly flat, and does not have finger grooves.

The new Buckmark Challenge Rosewood model is an example of the URX grip frame without wrap-around grips, so you can really see the URX grip frame on that model and, since it does not have wrap-around grips, it will fit very small hands. The UDX grip frame is different because it has separate left and right side panels not a wrap-around grip , but has finger grooves cut into the grip frame itself. Which frame style should you get? Otherwise, go to a store that has a selection of Buckmark pistols, and hold one of each type, and choose the one that fits your hand the best; chances are, it will be obvious when you try them side-by-side.

Grip comfort matters. I already have a Buckmark, or I'm looking to buy a particular Buckmark. Which grip frame does it have? The most reliable way to tell which grip frame a given Buckmark pistol has without taking the grips off is to look at the curvature of the backstrap when viewed from the side. The backstrap is the rear-most part of the grip UDX grip frame backstraps are not straight at all, they are gently curved along the entire backstrap.

Look closely at the first 3 pics in the first post of thread on RimfireCentral. If you're having a hard time seeing it, hold a straight-edge ruler, piece of paper, whatever up to the screen to see which parts are straight, and which are curved. Armed with this knowledge, you can just look at a Buckmark pistol from the side, and immediately tell which grip frame it has.

You can also tell by looking at the frontstrap the metal part of the grip frame under the trigger guard, where your middle, ring, and pinky fingers go when holding the gun when viewed from the side.

Unfortunately, this is not helpful if it has wrap-around grips that cover the frontstrap unless you're willing to take the grips off, of course. But, if you have a Buckmark on which you can see the front strap, or if you've taken the wrap-around grips off The UDX grip frame frontstrap is scalloped, with three finger grooves cut into the metal itself. Again, look at the first 3 pics in the first post of thread on RimfireCentral. You can also see the toe at the bottom of the frontstrap on all the Buckmark Rifle pics further down in that post, indicating that they are URX grip frames, even though the backstrap curvature is lost because of where the shoulder stock attaches to the bottom of the grip frame.

A few things to note about old vs. I was able to compare the factory original wood grips on my early 's-era Target 5. They are different. On the new Hunter, the right side grip's finger ridge is significantly more pronounced.

I like my old left-side grip better, but I think I like the new right-side grip better. Also note that the new Hunter grips are much shinier, and more highly polished, and, to be honest, just prettier-to-look-at pieces of wood.

I'm not sure if I'd like the more highly-polished feel when actually shooting, or not, though. As far as I know, there are 3 types of magazines for the Buckmark: the old round magazine made by Browning, the new round magazine made by Browning, and a round magazine made by ProMag.

Both styles work in both newer and older guns yes, I've actually tried this. The advantage of the newer style is that you have something to grab onto if you want to physically pull the magazine out of the gun. The advantage of the older style is that it sits flush doesn't stick out the bottom. Either works fine for me. A company called ProMag makes a round magazine for the Buckmark , but many people report fit or function issues with them.

I've never used one myself, though. Visually, the ProMag magazines are very similar to the Browning ones. There are several differences, but the easiest way to tell is by looking where the magazine body meets the base plate. Lite model has steel liner inside an ultralight aluminum sleeve.

Each chamber is hand-reamed and muzzle crowns are recessed to protect them from damage that could degrade accuracy.

Frame While many popular 22 pistols are cast or fabricated from sheet metal stampings, each Buck Mark frame is CNC machined from T6 aluminum to exacting tolerances. Magazine Heat treated magazine body for long-term feeding reliability.

Coil spring provides more consistent follower angle than typical Z-spring. Trigger Compare it to the competition and feel its light, crisp break with less creep and overtravel.

Safety Large, manual thumb safety. Trigger is disconnected when magazine is removed for added safety. Grips Several wood, laminate and composite styles are available. The Buck Mark pistol is one of the most proven 22 rimfire designs in the world today.

It superseded the original Challenger series of Browning 22 Long Rifle pistols in about Over the years the design of the Buck Mark has remained very similar with refinements most often in aesthetic design, grips and finishes. One interesting bit of history is that on earlier Challenger pistols the slide had a design with a flat side with slanted grooves for gripping and racking the slide back.